Commercial solar PV upgrade & expansion at JSP Ltd – Worsham Mill

Commercial solar PV upgrade & expansion at JSP Ltd – Worsham Mill

Turning a failed solar asset into a high‑performance energy investment

Client: JSP Ltd
Site: Worsham Mill
Installed Capacity: 346.62 kWp
Delivered by: SMARTech energy

SMARTech energy® delivered a highly successful commercial Solar PV upgrade and expansion at JSP Ltd’s Worsham Mill site, transforming a non‑functional legacy system into a high‑performing renewable energy asset.

By combining detailed energy analytics, selective reuse of existing infrastructure, and intelligent system redesign, the project now achieves close to 100% on‑site self‑consumption, minimal grid export, and an estimated 4‑year simple payback with a ~500% lifetime ROI over 20 years.

This project demonstrates how underperforming or ageing Solar PV systems can be upgraded into revenue‑generating assets that materially reduce operating costs, protect against energy price volatility, and support long‑term sustainability goals.

Solar PV installed by SMARTech energy at JSP Ltd

The Client challenge

JSP Ltd had invested previously in Solar PV, but the original system was no longer operational. This created several business risks:

  • Loss of on‑site renewable generation
  • No meaningful return on earlier capital investment
  • Rising exposure to grid electricity prices
  • Lack of performance visibility or actionable data
  • Negatively impacting client trust in technology

The requirement was not a like‑for‑like replacement, but a solution that maximised value from existing assets while delivering long‑term commercial performance.

The SMARTech approach

SMARTech energy® adopted a data‑led, asset‑optimisation strategy rather than a full strip‑out and replacement. Key elements of the solution included:

  • Detailed load analysis using historic monitoring data to accurately match generation to site demand
  • Selective decommissioning of non‑performing legacy arrays
  • Retention of viable infrastructure where performance remained acceptable
  • Installation of higher‑efficiency PV modules to replace underperforming sections
  • Expansion across multiple roof orientations (N‑W, S‑E and S‑W) to extend daily generation profiles
  • Export limitation in full compliance with G99/G100 requirements
  • Deployment of remote monitoring for real‑time performance tracking and optimisation

This approach ensured the system was correctly sized, avoided costly overspecification, and maximised on‑site utilisation of generated electricity.

System overview

  • Total installed capacity: 346.62 kWp
  • Inverters: 5 × Solis commercial inverters
  • Grid compliance: Export limitation in line with DNO requirements
  • Warranties: Long‑term manufacturer warranties on panels and inverters

The final design delivers consistent generation throughout the working day, aligning production closely with operational demand.

JSP Ltd - Worsham mill - Solar PV performance 2025

Measured performance

Live monitoring data confirms that the system is exceeding expectations.

July – December 2025:

  • Modelled generation: 130,774 kWh
  • Actual generation: 139,740 kWh
  • Performance vs prediction: 107%

Several months significantly outperformed forecast output, validating both the system design and commissioning quality.

Solar PV installed by SMARTech energy at JSP Ltd

Financial results

The financial performance has exceeded projections by a substantial margin.

July – December 2025:

  • Predicted import cost avoidance: £23,933
  • Actual import cost avoidance: £32,912
  • Electricity unit rate: ~£0.23/kWh

With export kept deliberately low, the system prioritises self‑consumption, delivering maximum financial benefit directly to the business.

Solar PV installed by SMARTech energy at JSP Ltd

Environmental impact and strategic benefits

  • Significant reduction in grid‑supplied electricity
  • Measurable reduction in associated carbon emissions
  • Direct contribution to JSP Ltd’s sustainability and Net Zero objectives
  • Improved resilience against future energy price volatility

Value delivered to the Client

  1. Immediate and verifiable reduction in electricity costs
  2. Recovery and extension of value from existing solar assets
  3. Transparent performance data via remote monitoring
  4. Long‑term operational visibility and optimisation capability
  5. A future‑proofed renewable energy platform
Solis invertors installed by SMARTech energy

Why this matters for other businesses

This project demonstrates that commercial Solar PV success is not just about installing more panels. The real value lies in:

  • Correct system sizing
  • Intelligent reuse of existing assets
  • High on‑site self‑consumption
  • Verified, data‑backed performance

SMARTech energy® delivers Solar PV solutions that perform as financial assets, not just sustainability statements.

Upgrade or optimise your Solar PV

Already have Solar PV on site?

Whether your system is underperforming, ageing, or no longer operational,
SMARTech energy® can assess, upgrade, and optimise your installation to deliver measurable commercial returns.

Solar PV installed by SMARTech energy at JSP Ltd
Pym & Wildsmith achieve a 23.8% verified reduction in energy use

Pym & Wildsmith achieve a 23.8% verified reduction in energy use

Pym & Wildsmith (Metal Finishers) Ltd. partnered with SMARTech energy through our Energy Efficiency as a Service (EEaaS) programme to achieve a 23.8% verified reduction in electricity use and significant carbon savings.

SMARTech’s Measurement and Verification model delivers transparent, independently verified energy and carbon savings.

Client overview

Pym & Wildsmith (Metal Finishers) Ltd. is a specialist metal finishing manufacturer based in Staffordshire. Operating across several industrial units with multiple production departments running concurrently, their processes rely heavily on both electricity and gas.

Through SMARTech energy’s EEaaS programme, Pym & Wildsmith set out to reduce energy use and carbon emissions, without upfront capital investment.

The challenge

SMARTech energy implemented a tailored EEaaS programme across the site, supported by advanced Measurement and Verification (M&V) in line with IPMVP Option C.

Following installation, SMARTech carried out the first reconciliation review to confirm verified savings, strengthen model precision, and ensure statistical robustness.

The work behind the results

To achieve the verified reductions, SMARTech energy implemented a combination of technology upgrades and control strategies under its Energy Efficiency as a Service (EEaaS) programme. These measures were designed to optimise energy use across the site while maintaining operational performance and comfort.

Lighting upgrade (LED)

The site’s existing magnetic ballast-based fluorescent lighting was replaced with high-efficiency LED fixtures.

This upgrade involved:

  • Removing and responsibly disposing of old fluorescent fittings in line with environmental regulations.
  • Installing modern LED luminaires that deliver improved illumination quality and visual comfort.
  • Deploying occupancy sensors and control systems to ensure lighting operates only when required.

These changes significantly reduced energy use and maintenance costs while extending fixture lifespan. The integrated control strategy further minimises unnecessary operation and ensures lighting aligns with actual site activity.

SMART Factory initiative

Prior to the project, the site’s production systems operated with limited automation, leading to unnecessary energy use and additional equipment wear.

Under SMARTech’s SMART Factory initiative, advanced sensors, control systems, and automation technologies were integrated into existing processes to synchronise and optimise machinery operation.

Key benefits include:

  • Dynamic control of energy use based on real-time production requirements.
  • Automated on/off cycles and synchronised process control.
  • Enhanced equipment performance and extended asset lifespan.

These technologies enable the site to adapt energy use to actual operational demand, improving efficiency and maintaining production quality without removing or replacing existing equipment.

The results

The analysis confirmed a 23.8% verified reduction in electricity use, achieved through a refined and statistically robust M&V model (R² = 0.93, CV(RMSE) = 13.8%).

This represents a measurable and ongoing reduction in both carbon emissions and energy intensity across the site.

The outcome

This reconciliation highlights the strength of SMARTech’s EEaaS programme, combining technology, analytics, and transparent M&V practices to deliver measurable and sustainable results.

The approach not only strengthens Pym & Wildsmith’s operational resilience but also supports their long-term sustainability goals through validated energy and carbon reductions.

Start your energy-saving journey with SMARTech energy

Learn how SMARTech’s Energy Efficiency as a Service can deliver guaranteed savings, verified performance, and measurable carbon reductions.

The Adelphi Group

The Adelphi Group

Energy savings of more than 73% with C02 reduction of 91 tonnes per year.

THE CLIENT

The Adelphi Group of Companies supply a wide range of packaging & processing machinery and equipment to a number of different industries.

THE CHALLENGE

Based in Haywards Heath, The Adelphi Group’s main production and stores area is situated on a mezzanine floor and with heat rising from the warehouse below, it has made the temperature too warm and uncomfortable to work in during the summer months.

Due to the large open space, evaporative cooling systems were recommended – as the running costs of traditional air conditioning would have proved too expensive*.

* Even on the very hottest summer days the evaporative cooling systems will supply fresh air cooling at temperatures below 23C at typically less than 10% of the operating costs of refrigeration

As an authorised installer of Evaporative Cooling systems for UK manufacturer, EcoCooling Ltd, SMARTech energy were brought on board to design in an energy efficient cooling system at the site – with the aim to improve the working environment for their staff.

Prior to the project start, a team from The Adelphi Group were invited to visit our previous evaporative cooling installation work at the Herman Miller factory site in Wiltshire, to better understand the installation process of evaporative cooling.

THE SOLUTION

  • 2 x Evaporative cooling systems with recirculation capability. Both controlled via single PLC
  • Cooled air is discharged to the area by 2 x fabric ducts running the length of the production area
  • 2 x nozzles in the ends of the duct direct more air to the mezzanine area
  • Hot air is removed via 2 x exhaust grilles located above the supply entry points
  • Low energy usage – automatically ramps up and down according to needs. Fresh air injection into working areas for operatives

BENEFITS OF EVAPORATIVE COOLING

  • Improves security – as would not need to leave doors open to introduce cooler air in summer
  • The external units are roof mounted so require no floor or external space for installation
  • All work can be carried out during business hours and does not require any downtime
  • The cooling solution will improve the working environment for its staff and deliver energy savings to the company
  • Acting as a recirculation system for winter and a ventilator or evaporative cooling system for the summer
  • Even on the very hottest summer days the Evaporative Cooling systems will supply fresh air cooling at temperatures below 23C at typically less than 10% of the operating costs of refrigeration

THE RESULTS

SMARTech energy were approached in late 2019 and work to a schedule that would take advantage of a quieter period in The Adelphi Group’s production; thereby allowing SMARTech energy to install the system with minimal disruption to daily operations and more importantly, have the air cooling systems functioning prior to the summer months.

The project was led by Head of Evaporative Cooling at SMARTech energy Seth Robinson.

Seth comments “The installation took a team of 3 engineers, 2 weeks to install and we are delighted with the finished project.  We will continue to maintain and service all of the units and our relationship with The Adelphi Group continues to thrive”.

For more information on this case study, please contact us on 01225 653 660 or via the website contact us page.

 

CONTACT US

Call our team on 01225 635 660 for more information on this case study and how we can help your business or organisation.
[sdfile id=”58136″]

Let SMARTech energy define and design the right solution for you

Verified Energy Savings of 28% for Hotel Group

Verified Energy Savings of 28% for Hotel Group

28% verified Energy Savings for Hotel Group

SMARTech energy’s team of specialist energy consultants have helped a major hotel chain to save 28% in energy consumption at one of their leading sites in Buckinghamshire.

With Energy Efficiency-as-a-Service, the hotel has had access to state-of-the-art energy efficient technology without any upfront costs.

An initial site survey and installation of energy monitoring technology identified the following technologies across the hotel for upgrades.

  • LED lighting upgrade

Energy consumption reduced by 79%

  • Gas boiler system upgrade

Energy consumption reduced by 40%

  • Thermal insulation jacket

Energy consumption reduced by 10%

Measurement and Verification of Electricity and Gas Energy Data

The energy savings are measured and verified using the International Performance Measurement Verification Protocol (IPMVP).

This protocol sets out how measurement and verification (M&V) is to be conducted and includes baselines, site data and the utility calculations used to show true savings.

The following graphs represent a reporting period from June 2021 to May 2022.

The top line on the graph is the adjusted baseline energy usage of kWhs used if upgrades to low-carbon technologies were not carried out.

The bottom line on the graph is the actual measured energy usage on utility bills following technology upgrades.

Verified Combined Energy Savings of 28%

Upgrades of gas and electricity technologies to low-carbon solutions have proven energy savings of 28% and with no upfront costs, finance leasing or risk, Energy Efficiency-as-a-Service is the economical way to make change.

The energy savings pay for the installation, maintenance and management of the low carbon technologies; allowing the hotel group to enjoy the benefits of an energy reduction and sustainability programme.

CONTACT US

Call our team on 01225 635 660 or contact us through the website for more information on this case study and how we can help your business or organisation through the Energy Efficiency-as-a-Service programme.

Hotel SAVES £30K per year energy spend with Energy Efficiency as a Service

Hotel SAVES £30K per year energy spend with Energy Efficiency as a Service

Hotel SAVES £30K per year on energy spend with Energy Efficiency as a Service

Corus Hotels, in partnership with energy management specialist SMARTech energy, are on track to meet green sustainability targets and save on energy costs – through a fully funded energy reduction programme, Energy Efficiency as a Service (EEaaS).

BURNHAM BEECHES HOTEL, SLOUGH

ENERGY CONSUMPTION REDUCED BY 34%

This follows the first successful roll-out of the Energy Efficiency as a Service programme at the group’s Burnham Beeches Hotel in Slough.

Hotels are inherently high users of energy.  The Burnham Beeches Hotel spends approximately £1.5m on gas and electricity over a 10 year period.  An initial monitoring and review of energy use at Burnham Beeches Hotel has identified savings of more than 34% in energy consumption.

With no upfront costs, finance leasing or risk, Energy Efficiency as a Service is the economical way to make change.  The energy savings pay for the installation, maintenance and management of the low carbon technologies; allowing the hotel group to enjoy the benefits of an energy reduction and sustainability programme.

CARBON EMISSIONS REDUCED BY 1,400 TONNES

Upgrades to lighting, boilers and motors are expected to show energy savings of more than £300k over the next 10 years, along with carbon savings of approximately 1,400 tonnes over the terms of the contract.

The following model shows energy use from June 2021 to October 2021.  The blue bars chart the adjusted baseline energy use (i.e. what the hotel’s energy use would have been this year – given the effects of the temperature in these months this year, and based on the relationship between their energy use and temperature previously).

£319k ENERGY SAVINGS OVER 10 YEARS

Using a diverse portfolio of more than 33 energy saving solutions, SMATech energy identified the following initial technologies to help reduce energy consumption:

  • LED lighting upgrade – Energy consumption reduced by 79%
  • Gas boiler system upgrade – Energy consumption reduced by 40%
  • Thermal insulation jacket – Energy consumption reduced by 10%

CARBON EMISSION SAVINGS EQUIVALENT TO 1483 TONNES

SMARTech energy have developed an integrated energy efficiency programme which has identified more than £319k savings in the hotel’s annual energy costs; alongside carbon savings of more than 1483 tonnes.

These savings demonstrate the hotel’s strong commitment to innovation, sustainability and best practice towards environmental policy.

Managing Director of SMARTech energy Stuart Pearce said “Energy Efficiency as a Service(EEaaS) is about making energy efficiency simple.  With EEaaS, the low carbon technologies are seen as a service – rather than a purchase.  Instead of purchasing the energy saving technologies, hotels can implement projects without capital expenditure, lease or risk”.

 

Ford Kuga 12.2% Fuel Savings with SMARTdrive

Ford Kuga 12.2% Fuel Savings with SMARTdrive

Ford Kuga 12.2% Fuel Savings per mile with SMARTdrive Software

SMARTdrive Software

Manage fuel consumption, emissions and driver behaviour with SMARTdrive fleet vehicle software.

What is SMARTdrive?

SMARTdrive is the latest fuel savings and energy efficiency software for fleet vehicles – which guarantees savings of 8% (HGV) and 10% (Cars and LCV).

A fully funded, shared savings fuel reduction programme for commercial vehicles, it enables Fleet Managers to increase operational efficiency, sustainability and compliance for an organisation’s vehicles with no upfront costs.  Its a model where the savings pay for the software.

Our Clients

SMARTech energy have recently worked with a large city council in the Midlands to reduce their fuel consumption across a fleet of vehicles.  SMARTdrive was installed on a number of vehicles and results have shown a significant improvement of fuel per mile.

THE RESULTS

SMARTdrive saves 12.2% Fuel Consumption on Ford Kuga 2250 CC

Vehicle Make: Ford.  Model: Kuga. Engine Size: 2250CC

Baseline Data: 12 months fuel data reviewed to create the baseline MPG

Average fuel economy prior to install is 27.22MPG

SMARTdrive Savings

Average full economy post install is 30.54MPG

SMARTdrive Results

Total percentage savings of fuel per mile = 12.2%

CONTACT US

Call our team on 01225 635 660 for more information on this case study and how we can help your business or organisation.
[sdfile id=”61698″]

Let SMARTech energy define and design the right solution for you